Kayfun Lite

They Say...

A simplified design with fewer parts and shorter overall length, the Kayfun Lite is the most cost-effective Kayfun atomiser available.

Still providing that warm, smooth, and flavourful vapour the Kayfun is known for, the Kayfun Lite features easy filling access via a screw on the underside of the base. No special bottle tip required for a fill port although a needle tip bottle is handy. Accepts standard 510 drip tips without the need for an adapter.

The Kayfun Lite kit allows two configurations with either a clear window or full stainless setup.

Designed in Russia and machined to exacting standards in Germany the SoveMesto Kayfun Lite is an impressive addition to the Kayfun range. Coil and wick setup is the same as the original and all existing parts for the tank section are cross compatible.

Average Rating

View ratings
Total average


Build quality ( 10.7 )
Ease of setup ( 9.3 )
Performance ( 10 )
Price ( 7.8 )
Availability ( 8.2 )

Purchase links

Video Reviews

Kayfun Lite Kayfun Lite Kayfun Lite

Added by mimsy

Profile photo of mimsy
Smoker for 15 years, tried to quit several times but usually failed within weeks. Now a shiny addict.
They sayIt's a little bit of a technical step up from rebuilding Protank heads, but it's a fine piece of kit.
They bought it fromCloud 9 Vaping
Their setup


Device information

Made bySvoeMesto
Atomiser typeGenesis
Tank TypeGlass
Aimed atExperienced Vaper

Reviews (6)

Kayfun Lite 8.6

If at first you dont succeed try try again. Bout a kflp that was sold as a real kfl but when I got it, there was signs that it was a clone. Took it to a local vape shop and they told me that the fire pin and deck were stripped beyond repair. I then bought a real kfl and have a .9 ohm coil atm. Makes decent clouds (for what it is) and produces wounderfull flavor.

Wick type used: Silica
Mod body used: ego and vision 2, k100,
Coil type: Single
Bought from: vape queen

  • build qc is great
  • rebuildable
  • clouds and flavor
  • price
Posted on July 20, 2014 10:58 am
Kayfun Lite 8.8

This product is easier to fill than the 3.1, which I like, but I did find that the draw is a bit too tight for me.

Wick type used: Silica
Mod body used: Provari
Coil type: Single
Bought from: VapeRev

  • Great flavor
  • Clouds
  • Tight draw
Posted on October 25, 2013 1:10 am
Kayfun Lite 9.0

Once I got through the small learning curve with the KFL, I found this to give a nice vape on my ProVari. I have only built using micro coils with cotton wicks.
When I used micro coils with my Protanks the flavor would tend to disapear from time to time. This would force me to change to a different flavor in order to vape. With the Kayfun, I haven't lost the flavor from any of the liquids that I have been using.
The vapor production has been top notch with the way the chimney forces the vapor out through the small chamber. This holds true through the stock drip tip that comes with this atty. I have been very pleased with this purchase, as it is allowing me to vape only one liquid without needing to have several other tanks around me, unless I choose to have them.

Wick type used: Silica
Mod body used: ProVari
Coil type: Single
Bought from:

  • Easy setup
  • loose draw
  • Vapor and flavor production
  • Cost
  • Availability
  • limited venders selling this item
Posted on October 24, 2013 7:40 pm
Kayfun Lite 9.6

Good build quality and performance at a very reasonable price. There was alot of hype about this silica tank atomizer and in my opinion the Kayfun Lite lives up to it. The flavor intensity on the KFL is amazing, most liquids taste phenomenal in it. Even flavors you thought you knew well will taste different (usually even better) in the KFL. Rebuilds are easy and the raised deck makes it very simple to work on. The sweetspot for me seems to be around 1.2-1.3 with 2mm ekowool. The vapor is on the warm side and the draw is just right for me. If you're used to drilled out drippers this will seem a bit tight. I usually do not buy two of the same RBA or mod until the Kayfun Lite, to me it is that good and a great value.

Wick type used: Silica
Mod body used: chiyou/nemesis/provari
Coil type: Single

  • Great flavor
  • Easy setup
  • Good build quality
  • If using the makrolon tank, it might break with some juices
  • Draw is not adjustable
Posted on October 13, 2013 7:58 am
Kayfun Lite 9.6

This is the one! Easy to set up and easy to use.
The only downside is that it does not have an adjustable air hole like the R91%, so you might find the draw a bit airy!

Wick type used: Silica
Mod body used: Dingo
Coil type: Single
Bought from: C9V

  • Ease of Use
  • Build Quality
  • No airflow control
  • Plastic Tank
Posted on September 18, 2013 8:56 am
Kayfun Lite 9.6

This is a really fine piece of kit. It isn't exactly cheap at £67, but it IS value for money. There are a lot of more expensive silica atomisers out there that offer either lesser, or similar performance and cost a lot more.

It is fairly easy to use, but does represent a marked step up from recoiling protank or evod heads. It's a little more particular about your coil and wick, and it might take you a few attempts before you get it running nice and smooth.

When it is running nice and smooth, it vapes beautifully, offers plenty of flavour, and never has 'dry hits' until the tank is running on fumes. Comes with a plastic tank and a stainless one for tank cracking juices.

The draw is a little on the airy side, but tighter than a Protank / Puritank, so unless you really like tight draws, this should be fine for you.

Wick type used: Silica
Mod body used: Vamo V3
Coil type: Single
Bought from: Cloud 9 Vaping

  • Extremely high build quality
  • Excellent performance when set up right
  • Value for money
  • Asks a little more of you than recoiling evods etc
  • Limited stock availible
  • Not very cheap
Posted on August 24, 2013 8:43 pm

Submit your own review

Click one of the buttons below to log in or register and leave a review.
Log in here  

Or join in using your favourite service
Go to top
Skip to toolbar